[LA-SiGMA-funded] EPSCoR RII Track 1 competition

Sat Jan 4 12:02:47 CST 2014

To all:

I would like to share with you what is happening at LSU  related to this
call.  When I first received this call from KT Valsaraj's office I sent the
first e-mail below (Dec. 20th) to the executive committee of the Institute
for Advanced Materials. After reading the report from the NRC "Novel
Processes for Advanced Manufacturing" I sent the second e-mail with my
summary (attachment).  This has also been forwarded to KT office and to the
dean of engineering. In general, Dean Koubek agreed with my summary.

I have been appointed by the NAS to serve  on the Defense Materials
Manufacturing and Infrastructure (DMMI) Standing Committee, whose next
meeting will be Feb. 5th and 6th in Washington, DC.  The meeting is
organized around data management and data mining.

If possible I would like for all of us to work together on this proposal.
Data management or mining will be a big issue but at present that means DFT
calculation of materials.  Our proposal must be coupled with engineers who
know what manufacturing means.  My perspective is that we have to aim our
program at eventually getting DOD money.  If you want to see what the
competition is look at the  Center for Innovative Materials Processing
through Direct Digital Deposition  at Penn State.

Thanks
Ward 

To all:
I have read the report from DMMI NRC report "Novel Processes for Advanced
materials," and I would like to give you my summary.   I have attached this
summary which we will discuss at the next IAM executive committee meeting.
Let me summarize what I have written, just in case you don't have time to
read the attached document.

1. Those on the inside of the workshop will be on the inside for funding.
Richard Martukanitz told them how great the PENN State Center for Innovative
Materials Processing through Direct Digital Deposition was.  Gerard Ludtke
told them how great the ORNL High-magnetic field processing center was.
Boebinger told them how great the Nat. High Magnetic Field Laboratory is----
2. For reasons I do not know this meeting focused on three areas of advanced
manufacturing-1) Additive Manufacturing; 2) Electromagnetic Field
Manipulation, and ; 3) Design of Materials.
3. My perspective is that our opening is in the Design of materials.
By the way, I have not heard from the two people on the executive committee
that constantly remind me that advanced manufacturing if very important.

Ward

From: Ward Plummer <wplummer at phys.lsu.edu>
Date: Friday, December 20, 2013 3:58 PM
To: Barb Dutrow <dutrow at lsu.edu>, Robin L McCarley <tunnel at lsu.edu>, Wen J
Meng <wmeng1 at lsu.edu>, Dimitris E Nikitopoulos <medimi at lsu.edu>, Patrick
DiMario <pdimari at lsu.edu>, Richard L Kurtz <rlkurtz at lsu.edu>, Robert Lipton
<lipton at math.lsu.edu>, "John C. Flake" <johnflake at lsu.edu>, Rongying Jin
<rjin at lsu.edu>, Todd Monroe <tmonroe at lsu.edu>, Ward Plummer
<wplummer at phys.lsu.edu>
Cc: William Shelton <sheltonwajr at gmail.com>, James J Spivey
<jjspivey at lsu.edu>, Daniel J Hayes <danielhayes at lsu.edu>, Kalliat T Valsaraj
<valsaraj at lsu.edu>
Subject: FW: EPSCoR RII Track-1 RFP

 We should submit a proposal to this call. I assume it must come from
Engineering but the rest of us can help.    I have a NRC report on "Novel
Processes for Advanced Manufacturing"  which could be useful and   which
might also help us.

Have a great Christmas, but think about writing!
Ward

From: Holly Carruth <hcarruth at lsu.edu>
Date: Friday, December 20, 2013 2:21 PM
Cc: Kalliat T Valsaraj <valsaraj at lsu.edu>, Holly Carruth <hcarruth at lsu.edu>
Subject: EPSCoR RII Track-1 RFP

To: Deans and Directors

From: Vice Chancellor Kalliat T. Valsaraj

Re: EPSCoR RII Track-1 RFP

Please distribute the following information to your faculty.

Attached is the LA ESPCoR Research Infrastructure Improvement (RII) request
for proposals, which solicits proposals for multi-institutional research
initiatives in advanced materials and manufacturing.  Proposers may request
up to $4 million annually for a period of five years. Notices of Intent are
required and are due on February 24, 2014; proposals are due on April 10,
2014.

Please distribute this RFP to all interested parties on your campus.  The
RFP and associated forms are also available on the Board's Sponsored
Programs website at: http://web.laregents.org/

-------------------------------------------
Jim Gershey
Executive Director of Special Programs
Louisiana Board of Regents
1201 N. Third Street, Suite 6-200
Baton Rouge, LA 70802 (physical address)

Post Office Box 3677
Baton Rouge, LA 70821-3677 (post office address)

telephone: 225-342-4253
fax: 225-342-9318
jim.gershey at la.gov

Kalliat T Valsaraj, Ph.D., BCES
Vice Chancellor of Research and Economic Development
Charles and Hilda Roddey Distinguished Professor
Ike East Professorship in Chemical Engineering
134 David Boyd Hall
Louisiana State University
Baton Rouge, LA 70803-7303
Ph: 225 578 5833
Fax: 225 578 5983
E-mail: valsaraj at lsu.edu

This e-mail is meant solely for the intended recipient(s). It may contain
privileged and confidential information.

From:  Mark Jarrell <jarrellphysics at gmail.com>
Date:  Friday, January 3, 2014 2:09 PM
To:  <lasigma-funded at loni.org>, <li-investigators at loni.org>, "B. Ramu
Ramachandran" <ramu at coes.latech.edu>, Bety Rodriguez-Milla
<brodrig at cct.lsu.edu>, Devesh Misra <dmisra at louisiana.edu>
Subject:  [LA-SiGMA-funded] EPSCoR RII Track 1 competition

Dear LONI Institute and LA-SiGMA members,
Just before the holidays, the State EPSCoR office sent out the request for
proposals for the next EPSCoR RII Track 1 competition (attached).   If
successful, this grant would provide up to $4/year for up to five years.
The subject matter of the RFP has significant overlap with LA-SiGMA and LONI
Institute (LI).  Quoting from the RFP:

"The proposal must be focused on scientific and engineering research in
Advanced Materials and Manufacturing; i.e., physics-based materials models
to link manufacturing, production, design, and materials; smart materials;
and multiscale systems and manufacturing. The proposed initiative should
bring together a confluence of scientists and engineers to bridge the gaps
that exist between theory, modeling and simulation, application, and
production. The goal is to link the structure and composition of
materials‹extending the entire length scale‹with their manufacturing and
properties. Successful proposals will leverage the State¹s investments in
computational resources, cyberinfrastructure, and advanced materials
science. Proposals should establish strong linkages between institutions and
the private sector. EPSCoR funds must be expended in Louisiana and cannot be
transferred to other locations for these initiatives."

We should be able to leverage many of the outreach and education programs
that have been build by LI and LA-SiGMA.  Thus far our research focus has
been materials design using ICME, but we have not settled on any particular
set of materials yet.  We would like to know if you would be able to
participate in an organization meeting some time in the next week or so to
discuss the possibility of putting together a proposal based upon LA-SiGMA
and LI.   Possible dates for the meeting could be Jan 13, 15, 16, 22, or 23.
Since classes start at LSU on the 15th, the 13th might be the best date.  If
enough people are interested, we will use a doodle poll to find the best
time

best,
Mark and Ramu

-- 
*****************************************************************
* Mark Jarrell, Professor    | www.phys.lsu.edu/~jarrell
<http://www.phys.lsu.edu/~jarrell>     *
* Dept. of Physics & Astron. | e-mail: jarrellphysics at gmail.com *
* Louisiana State University | Physics phone:  (225) 578-7528    *
* Baton Rouge, LA 70803      |     CCT phone:  (225) 578-8271    *
*****************************************************************
_______________________________________________ LaSiGMA-funded mailing list
LaSiGMA-funded at loni.org
https://mail.loni.org/mailman/listinfo/lasigma-funded

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://mail.loni.org/mailman/private/lasigma-funded/attachments/20140104/06d277db/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SummaryDMMIWS.docx
Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document
Size: 132393 bytes
Desc: not available
Url : https://mail.loni.org/mailman/private/lasigma-funded/attachments/20140104/06d277db/attachment-0001.bin 